Product introduction

Polyacrylamide is a White granular orViscous liquid, non-toxic, non-corrosive, easily soluble in water, mainly used as a selective flocculant fornon-dispersed, low solid phase water-based drilling fluid. it can help toreduce

water losses, improve drilling fluidrheological properties and reduce the friction resistance as well.


Anionic Polyacrylamide is widely used inoil exploration, profile control, plugging agent, dilling fluids, fracturing fluids additives. For Drop in driling fluidloss, flocculation, shale inhibition, dilution, plugging, cooling and lubricating the drill bit and drill string,carrying debris, cementing well it also plays an important role in these

Cationic Polyacrylamide is used asflocculant for waste water treatment.


1) With high strength of the molecularchain, it has good shearing resistance.

2) It can improve mud cake quality andinhibit viscose soil being dispersed.

3) It has a heat stability and stands 210C.

4) It has a strong capability of resistingcalcium and magnesium.

5) lts calcium resistance can be up to10000ppm.

6) It can be applied in fresh water,seawater, and saturated salt water and Brine for completion dillig fluids.

7) It can match with other agents well.


1) 25 Kg kraft bags with plastic inner orPE bags or according to users' requirement. The shelf life is 2 years.

2) Polyacrylamide is moisture absorbent,thus to protect from damp and moist for conservation. It should be

stored in a dry and ventilate storehouse,and not be exposed to air and sunshine.